Nikon Nivo 2.C Скачать руководство пользователя

Страница: 20 / 32

Preparation

Total Station Nivo Series Instruction Manual

Unpacking and Packing the Instrument

Note –

Handle the Nivo series instrument gently to protect it from shocks and

excessive vibration.

Unpacking

To unpack the instrument, grip the carrying handle
and gently remove the instrument from the carrying
case.

Packing

To pack the instrument back into the carrying case,
please refer to the figure on the right.

Charging the Battery Pack

Before charging the battery pack, read the warnings (also listed in the Safety section
at the front of this manual) and the following notes.

WARNING –

Do not damage the rechargeable Lithium-ion battery. A damaged battery can

cause an explosion or fire, and can result in personal injury and/or property damage.
To prevent injury or damage:
–

Do not use or charge the battery if it appears to be damaged. Signs of damage include, but
are not limited to, discoloration, warping, and leaking battery fluid.

–

Do not expose the battery to fire, high temperature, or direct sunlight.

–

Do not immerse the battery in water.

–

Do not use or store the battery inside a vehicle during hot weather.

–

Do not drop or puncture the battery.

–

Do not open the battery or short-circuit its contacts.

WARNING –

Avoid contact with the rechargeable Lithium-ion battery if it appears to be leaking.

Battery fluid is corrosive, and contact with it can result in personal injury and/or property
damage.
To prevent injury or damage:
–

If the battery leaks, avoid contact with the battery fluid.

–

If battery fluid gets into your eyes, immediately rinse your eyes with clean water and seek
medical attention. Do not rub your eyes!

–

If battery fluid gets onto your skin or clothing, immediately use clean water to wash off the
battery fluid.

Содержание Nivo 2.C

































Результаты поиска

Содержание Nivo 2.C

Отзывы:

Похожие инструкции для Nivo 2.C

Бренды по названию

Популярные бренды

Nikon Nivo 2.C, Инструкция по эксплуатации

Результаты поиска

Содержание Nivo 2.C

Отзывы:

Похожие инструкции для Nivo 2.C

Бренды по названию

Популярные бренды