Nikon N1933, Справочное руководство, Страница: 765 / 778

723
NIKKOR Z 24–200mm f/4–6.3 VR Lens Manual
❚❚
Vibration Reduction (VR)
The lens’s on-board vibration reduction can be enabled or
disabled using camera controls; see the camera manual for
details. With [
Normal ] selected for the on-camera vibration
reduction option, vibration reduction allows speeds up to
5.0 stops
* slower than would otherwise be the case, expanding
the range of shutter speeds available.
* Measured according to CIPA standards. Values for lenses that support
FX format are measured on FX -format mirrorless cameras, those for DX
lenses on DX-format mirrorless cameras. Values for zoom lenses are
measured at maximum zoom.
D
Vibration Reduction
•
Due to the design of the vibration reduction system, the lens may rattle
when shaken. This does not indicate a malfunction.
•
To reduce blur caused by tripod shake, select [ Normal ] or [ Sport ] for
the on-camera vibration reduction option when the camera is mounted
on a tripod. Note, however, that depending on the type of tripod and
shooting conditions, there may be cases in which [
Off ] is the preferred
option.
•
[ Normal ] or [ Sport ] is recommended when the camera is mounted on a
monopod.
❚❚
When the Lens Is Attached
The focus position may change if you turn the camera off and
then on again after focusing. If you have focused on a pre-
selected location while waiting for your subject to appear, we
recommend that you do not turn the camera off until the
picture is taken.