Thank you for purchasing the Nikon Fieldscope Digital Camera Bracket for COOLPIX
5200/4200. Use of your digital camera in combination with a Fieldscope enables you
to take super-telephoto digital pictures.
Items supplied
• Bracket x 1
• Cable release x 1
• Non-skid pad x 2 (spare included)
Nomenclature
1
Non-skid pad
2
Cable release socket
3
Bracket
4
Fixing screw
5
Camera lens socket
6
Eyepiece socket
7
Camera fixing screw
Notes for shooting
• Use solid tripod during super-telephoto shooting for steady images.
• Beware of camera shake as small vibrations at high magnification can ruin a photograph.
• With super-telephoto shooting, it may be difficult to obtain focus with the camera’s AF
function. We recommend that you take a series of pictures of the same subject, to ensure you
capture the desired image.
Attaching the Fieldscope to the digital camera
1.
Remove the sheet from the adhesive side of the non-skid pad, and affix the pad to the shutter
release button of the COOLPIX 5200/4200.
2.
Put the lens of the camera into the camera lens socket and tighten the camera fixing screw to fix it
in place.
Note: When fixing the bracket, the grip of the camera and the bracket should come into contact.
3.
Screw the cable release into the cable release socket.
4.
Put the eyepiece attached to the Fieldscope into the eyepiece socket and tighten the fixing screw to
fix it in place while pressing the bracket against the eyepiece.
• Focusing
Set for single focusing. Focus first using the controls on the Fieldscope, then make fine
adjustments with the camera’s AF function.
Set the camera’s AF Area Mode to “Center-focus” instead of “Auto”.
“Manual” can also be selected.
• Shooting mode
Set for “Auto” mode.
• Shooting
Use cable release. Depress the cable release gently.
• Camera zoom setting
When shooting with the zoom at the widest-angle setting, shade will appear in the four
corners of the image depending on the type of eyepiece in use, giving it a rounded
appearance. We recommend the use of maximum telephoto setting when MC or MC II Zoom
Eyepiece is used.
Setting for shooting
Fieldscope Eyepiece
24x / 30x Wide DS
40x / 50x Wide DS
60x / 75x Wide DS
Fieldscope
COOLPIX 5200/4200 +
Digital Camera Bracket FSB-1
Attachment
B
Wide MC or MC II Zoom Ey
FSA-1&-2
A
2
1
C
1
Screw the eyepiece (either
A
or
B
) into the
eyepiece socket.
2
Attach the assembly in
C
to the eyepiece.
* Keep the bracket pressed against the eyepiece while
fixing it in place.
A
Wide MC or MC II Zoom Eyepiece with FSA-1
and FSA-2 attached.
B
Fieldscope Eyepiece (24x/30x, 40x/50x,
60x/75x) Wide DS.
C
COOLPIX 5200/4200 with Digital Camera
Bracket FSB-1 attached.
[Focal length (35mm [135] format equivalent) with FSB-1] = [Focal length (35mm [135] format equivalent) of the COOLPIX 5200/4200 (38-114mm)] x [magnification of eyepiece]
FSB-1 Bracket (2DE) 05.3.17 13:23 ページ2
