Nikon Forestry Pro II, Инструкция по эксплуатации

Страница: 24 / 56

24
En
Fr
„ „
Measuring with 3 points mode
Before starting the measurement, set the measurement display
mode to “3 points mode”. See page 21 for more information.
Perform measurement three times in the order of
1
,
2
, and
3 in the illustration on the right. Points 2 and 3 can be
reversed.
Ang (1)
Ang (2)
Hgt (1)
Hgt (2)
1. Press the PWR button to turn on the power.
• When the laser rangefinder is on standby, flashes in the internal display.
2. Aim at the first point of the target (
1
), and then press the PWR
button to measure.
• The measurement result (horizontal distance to the first
point) is displayed as shown on the right.
• stops flashing and starts flashing.
Internal display External display
3. Aim at the 2nd point of the target ( 2 ), and then press the PWR
button to measure.
• The measurement result (Ang (1) and Hgt (1)) is displayed as
shown on the right.
• stops flashing and starts flashing.
4. Aim at the 3rd point of the target (
3
), and then press the PWR
button to measure.
• stops flashing and the measurement result (Ang (2)
and Hgt (2)) is displayed. See page 20 for more
information on the display content.