15
Remove the camera
Remove the camera and dry the inside of the case
with a soft, dry cloth.
Removing the Camera
Do not open the case in areas exposed to blown
sand or spray. Be careful not to drop the device
and make sure that droplets from your hair, body,
or other objects do not fall into the case or onto
the camera. To prevent water from entering the
case, keep the FJ-CP1 upright, with the shutter-
release button on top. Do not place the open
case with the seal face down. If water does fall
on the camera, dry it off immediately.
Wash the case in fresh water
The FJ-CP1 should be cleaned immediately after
use. Before opening the case and removing the
camera, wash the case in a basin of fresh water.
Wipe dry
Dry the exterior of the case thoroughly with a
soft, dry cloth.
Drying the Case
Be careful to remove water that may have col-
lected in the buckle, controls, or strap eyelet.
Clean the FJ-CP1
Clean the FJ-CP1