Nikon Eclipse TS100 Скачать руководство пользователя страница 9 | Manualshive

Страница: 9 / 55

background image

Safety Precautions

E-8

WARNING and CAUTION for Using

the TS100LED MV/TS100LED-F MV

1. Do not disassemble.

Disassembly may cause malfunction and/or electrical shock, and will lead to the forfeiture of all claims
against warranty. Do not disassemble any part other than those described in this manual. If you
experience any problem with the microscope, contact your nearest Nikon representative.

2. Read the instructions thoroughly.

To ensure safety, thoroughly read this manual and the manuals for other equipment to be used with
this product. In particular, be sure to follow the warnings and cautions at the beginning of the manuals.

3. Input voltage

This product can be used with 100 to 240 V AC at 50/60 Hz, and can be used with most wall outlets in
the world. However, note that you avoid using the product under an environment where the supply
voltage may extremely fluctuate.

4. Cautions on the power cord

Be sure to use the provided (or specified) power cord. Use of other power cords may result in
malfunction or fire.

•

See Chapter 8, “Specifications - 2 Performance Properties” for the specified power cord.

•

To prevent electric shock, turn off the power switch (press the power switch to the “

○

” position)

before connecting or disconnecting the power cord.

•

Note that this product is classified as Class I for electric shock protection. Be sure to connect it to a
protective earth terminal.

5. Notes on handling flammable solvents

The following flammable solvents are used with the product:

•

Immersion oil (Nikon immersion oil for oil immersion objectives)

•

Absolute alcohol (ethyl alcohol or methyl alcohol for cleaning optical parts)

•

Petroleum benzine (for wiping off the immersion oil)

•

Medical alcohol (for disinfecting the microscope)

Never hold a flame near these solvents. When using a solvent, thoroughly read the instructions
provided by the manufacturer, and handle correctly and safely. Note the following precautions when
using solvents with the product.

•

Keep solvents away from any parts that may become hot.

•

Keep solvents away from the product and its surroundings when turning on/off the power switch or
plugging/unplugging the power cord.

•

Be careful not to spill the solvents.

WARNING

«
...
7
8
9
10
11
...
»

Содержание Eclipse TS100
























































Отзывы:

Нет отзывов

Похожие инструкции для Eclipse TS100

Бренд: Vision Страницы: 21

1210CM, 1211CM, 1220CM, 1221CM, 1222CM, 1223CM, 1230CM, 1231CM, 1232CM,...

Бренд: Van Guard Страницы: 20

Бренд: Motic Страницы: 40

Бренд: OPTO-EDU Страницы: 10

Бренд: 3B SCIENTIFIC PHYSICS Страницы: 24

Бренд: Levenhuk Страницы: 50

Бренд: Harbor Freight Tools Страницы: 6

Бренд: 3B SCIENTIFIC PHYSICS Страницы: 2

Primomic 114005

Бренд: Gundlach Страницы: 2

Fluoview FV1000

Бренд: Olympus Страницы: 7

Бренд: Zeiss Страницы: 24

Бренд: KERN Страницы: 14

Бренд: Olympus Страницы: 36

Бренд: Richter Optica Страницы: 7

Бренд: Richter Optica Страницы: 9

Бренд: Richter Optica Страницы: 9

Бренд: Richter Optica Страницы: 8

Бренд: Richter Optica Страницы: 6

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды