123
6
Check the results.
If the camera was able to measure a
value for white balance,
C
will
flash in the control panel, while the
viewfinder will show a flashing
a
.
Press the shutter-release button
halfway to exit to shooting mode.
If lighting is too dark or too bright,
the camera may be unable to
measure white balance. A flashing
b a
will appear in the control
panel and viewfinder. Press the
shutter-release button halfway to
return to Step 5 and measure white
balance again.
D
Direct Measurement Mode
If no operations are performed during viewfinder photography while
the displays are flashing, direct measurement mode will end in the
time selected for Custom Setting c2 (
Standby timer
A
Selecting a Preset
Selecting
Preset manual
for the
White
balance
option in either of the shooting
menus displays the dialog shown at right;
highlight a preset and press
J
. If no value
currently exists for the selected preset, white
balance will be set to 5200 K, the same as
Direct sunlight
.
Control panel
Viewfinder
Control panel
Viewfinder
Содержание D720
Страница 282: ...258 3 Select Authentication encryption 4 Select WPA2 PSK AES Select WPA2 PSK AES and select OK 5 Select Password ...
Страница 402: ...378 A Certificates ...
Страница 415: ...391 ...
Страница 416: ...392 ...