197
4
Adjust shutter speed and aperture.
5
Take pictures.
D
Use Only Nikon Flash Accessories
Use only Nikon flash units
. Negative voltages or voltages over 250 V
applied to the accessory shoe could not only prevent normal
operation, but damage the sync circuitry of the camera or flash. Before
using a Nikon flash unit not listed in this section, contact a Nikon-
authorized service representative for more information.
A
Shutter Speed
Shutter speed can be set as follows when an optional flash unit is used:
Mode
Shutter speed
P
,
A
Set automatically by camera (
1
/
250
s–
1
/
60
s)
*
S
Value selected by user (
1
/
250
s–30 s)
M
Value selected by user (
1
/
250
s–30 s, Bulb (
A
), Time (
%
))
* Shutter speed may be set as slow as 30 s if slow sync, slow rear-curtain sync, or slow sync
with red-eye reduction is selected for flash mode.
A
The Sync Terminal
A sync cable can be connected to the sync
terminal as required. Do not connect
another flash unit via a sync cable when
performing rear-curtain sync flash
photography with a flash unit mounted on
the camera accessory shoe.
A
Unified Flash Control
Unified flash control allows the camera and flash unit to share settings.
If a flash unit that supports unified flash control is mounted on the
camera, changes to flash settings made with either the camera or flash
unit are reflected on both devices, as are changes made using optional
Camera Control Pro 2 software.
