Nikon CoolShot Pro Stabilized, Инструкция по эксплуатации

Страница: 15 / 356

15
En
Es
Fr
De
It
Sv
Nl
Ru
Pl
Fi
No
Dk
Cz
Ro
Hu
Pb
„ „
Changing the internal display luminance (F2)
Adjust the brightness of the internal display. The factory default setting is A (Auto, automatic brightness
control). You can select A, or 1 to 5.
• A (Auto): The luminance is adjusted automatically according to the brightness of
the surroundings.
• 1 - 5: 1 is the darkest, while 5 is the brightest.
1. Press the PWR button to turn on the Laser Rangefinder.
2. Press and hold the MODE button.
3. Press the MODE button once.
• You can now change the internal display luminance.
4. The setting switches every time you press the PWR button.
A 1 2 3 4 5
• If you press and hold the MODE button or do not operate the buttons for about 8 seconds, the
displayed setting is saved and the Laser Rangefinder returns to standby.
• The setting is saved even when the Laser Rangefinder is turned OFF.
l Temporarily changing the internal display luminance setting
If the internal display is difficult to see due to the surrounding conditions, you can temporarily change
the brightness. The luminance changes every time you press the MODE button.
• The luminance level is not displayed in the internal display.
• A (Auto) cannot be set.
• When the Laser Rangefinder is turned OFF, the internal display returns to the original luminance.