Nikon COOLPIX S9400, Справочное руководство

Страница: 228 / 252

F
8
Troubleshooting
Te
chni
cal
Not
e
s an
d In
de
x
The monitor is
blank.
• Camera is off.
• Battery is exhausted.
• Standby mode for saving power: Press the power switch,
shutter-release button,
c
button or
b
(
e
movie-record)
button, or rotate the mode dial.
• When flash lamp flashes, wait until flash has charged.
• Camera and computer are connected via USB cable.
• Camera and TV are connected via audio/video cable or HDMI
cable.
• Camera and smart device are connected using Wi-Fi
connection and the camera is operated by remote control.
19
18
19
50
77, 80
77,
E
20
93
Monitor screen is
hard to see.
• Adjust monitor screen brightness.
• Monitor is dirty. Clean monitor screen.
96,
E
70
F
6
Date and time of
recording are not
correct.
• If the camera clock has not been set (“Date not set” indicator
flashes during shooting), still pictures have a time stamp of
“00/00/0000 00:00”; and movies are dated “01/01/2013 00:00.”
Set the correct date and time using
Time zone and date in
the setup menu.
• The camera clock is not as accurate as a normal clock, such as
watches. Check camera clock regularly against more accurate
timepieces and reset as required.
20, 96,
E
68
96,
E
68
No information
displayed on the
monitor.
Hide info is selected for Photo info under Monitor settings in
the setup menu.
96
E
70
Print date not
available.
Time zone and date in the setup menu has not been set.
20, 96,
E
68
Date not
appearing on
pictures even
when
Print date is
enabled.
• A shooting mode that does not support print date is selected.
• Another function that is set now is restricting the print date.
• The date cannot be imprinted onto a movie.
96,
E
72
64
–
Screen for setting
time zone and
date is displayed
when camera is
turned on.
Clock battery is exhausted; all settings were restored to their
default values.
21
Camera settings
reset.
Problem Cause/Solution
A