Nikon COOLPIX S800c, Быстрый старт

Страница: 160 / 271

E
3
Usi n g Ea sy Pan o ra m a ( Shooti n g an d Pla yb ack)
Re
fe
re
n
ce
S
ec
ti
o
n
Example of Camera Movement
•
The operator, without shifting position, moves the camera horizontally or
vertically in an arc so that the guide travels from one edge to the other.
•
Shooting stops if the guide does not reach the edge within about 15 seconds
(when
W
Normal (1 80 °) is selected) or within about 30 seconds (when
X
Wide ( 3 6 0 °) is selected) after shooting starts.
B
Notes About Easy Panorama Shooting
•
The range of the image seen in the saved image will be narrower than that seen in the monitor at
the time of shooting.
•
If the camera is moved too quickly or shaken too much, or if the subject is too uniform (e.g. walls or
darkness), an error may occur.
•
If shooting stops before the camera reaches the halfway point in the panorama range, a panorama
image is not saved.
•
If more than half of the panorama range is captured but shooting ends before reaching the edge
of the range, the range not captured is recorded and displayed in gray.
C
Changing the Shooting Range
•
In easy panorama scene mode, press the
d
button,
tap
p
, and tap
W
Normal (1 80 °) or
X
Wide
( 3 6 0 °) .
•
When the camera is held in the horizontal position
during shooting, the image size (width × height) is as
follows:
-
Normal (1 80 °) : 3200 × 560 when moved horizontally,
1024 × 3200 when moved vertically
- Wide ( 3 6 0 °) : 6400 × 560 when moved horizontally, 1024 × 6400 when moved vertically
- When the camera is held in the vertical position during shooting, the direction and the width
and height are switched.
Ea sy p an o ra m a
N o r m a l ( 1 80 ° ) W id e (360 ° )