Nikon COOLPIX S1200pj, Справочное руководство

Страница: 188 / 228

E
70
The Setup Menu
Refe
rence S
e
cti
o
n
Sound Settings
Adjust the following sound settings.
B
Notes on Sound Settings
• In Pet portrait scene mode, button and shutter sounds are disabled.
• The button sound is not generated when the projector is in operation.
Auto Off
When the camera is on and a period of time passes without any operations having
been performed, the monitor will be turned off and the camera will enter standby
mode (
A
23) to save power. In this option, set the time allowed to elapse before
the camera enters standby mode. 30 s , 1 min (default setting), 5 min , and 30 min
can be selected.
C
When the Monitor Turns off for the Power Saving Function
• Power-on lamp blinks in standby mode.
• Camera turns off after three minutes passes in standby mode.
• To reactivate the monitor while the power on lamp is blinking, press any of the following buttons:
- Power switch, shutter-release button,
A
button,
c
button or
b
(
e
movie-record) button
• See “Auto Off with Projection” (
A
82) for more information.
C
Auto Off Settings
The time allowed to elapse before the camera enters standby mode is fixed in the following situations:
• When a menu is displayed: three minutes
• During slide show playback: up to 60 minutes (when using the Rechargeable Li-ion Battery EN-EL12)
• When the AC adapter EH-62F is connected: 30 minutes
d
button
M
z
tab
M
Sound settings
Option Description
Button sound
Select On (default setting) or Off . When On is selected, a beep
will sound once when operations are completed successfully,
twice when the camera acquires focus on the subject, and
three times when an error is detected. Start-up sound will also
play when the camera is turned on.
Shutter sound
Select On (default setting) or Off . No sound is played with
shutter release when some features such as continuous
shooting or BSS (best shot selector) are enabled, or recording
movies, even if
On is selected.
d
button
M
z
tab
M
Auto off