F
9
Techni
cal N
o
te
s and Index
Monitor is hard to read.
•
Select
Monitor settings
>
Brightness
in the
setup menu and adjust the monitor brightness.
•
The monitor is dirty. Clean the monitor.
Date and time of recording
are not correct.
•
If the camera clock has not been set,
O
flashes
during shooting and movie recording. Images and
movies saved before the clock is set are dated “00/
00/0000 00:00” or “01/01/2015 00:00” respectively.
Set the correct time and date from the
Time zone
and date
option in the setup menu.
•
The camera clock is not as accurate as ordinary
watches or clocks. Periodically compare the time of
the camera clock with that of a more accurate
timepiece and reset as required.
No indicators displayed in
monitor.
Hide info
is selected for
Photo info
in
Monitor
settings
in the setup menu.
Date stamp
not available.
Time zone and date
has not been set in the setup
menu.
Date not imprinted on
images even when
Date
stamp
is enabled.
•
The current shooting mode does not support
Date
stamp
.
•
The date cannot be imprinted on movies.
Screen for setting time zone
and date is displayed when
camera is turned on.
The clock battery is exhausted; all settings were
restored to their default values.
Camera settings reset.
Camera becomes hot.
The camera may become hot when used for an
extended period of time to shoot movies or when
used in a hot environment; this is not a malfunction.
–
Camera makes sound.
When
Autofocus mode
in the movie menu is set to
Full-time AF
or while in some shooting modes, the
camera may produce an audible focusing sound.
Problem
Cause/Solution
A