Setting the
SB-600
to Wireless Remote Mode
1.
With the unit on, press and hold the
ZOOM
and the
“ – ”
together for two seconds.
2.
Press either the
ZOOM
or
MODE
button to select wireless
mode
ON/OFF.
3.
Press
ON/OFF
for one second. The flash will be set in
the Wireless Remote mode. (Default: CH 3, Group A)
4.
Press
MODE
to highlight the channel (1, 2, 3 or 4) and
use
“+/–”
to select the same channel as the Master Flash.
5.
Press
MODE
again and choose a group (A, B or C).
The amount of output compensation set for that group
on the Master Flash will determine the amount of output
from the Remote Speedlight.
Be sure to choose the same channel number as set on
the Master flash unit or in the Commander mode on your camera.
To exit Wireless and return to Normal TTL operation
To reset the SB-600 unit to normal TTL operation, reverse the steps above or hold
ON/OFF
and
MODE
button for two seconds. To exit remote operation of the SB-900 or SB-700 simply
turn the ON-OFF switch/wireless settings to the ON position.
To set the
SB-R200 Remote
Speedlight
to the desired
Group and Channel, simply
rotate the dial for that
function.
For more information on setting your wireless Speedlights please see your instruction manual.
Create dramatic
lighting with
two Speedlights
positioned
strategically
within the scene.
Speedlight
Group A
Speedlight
Group B
SU-800 on-camera
commandar
WHY MORE THAN ONE
SPEEDLIGHT?
