116
Registering with my Picturetown
U
p
lo
ad
in
g
P
ic
tures t
o
the
m
y P
ic
turetow
n
S
er
ver (
P
ic
ture
B
a
nk
)
Registering a Camera with my Picturetown
A camera must be registered with the my Picturetown server in any of the following
situations:
•
You registered with my Picturetown before setting up the LAN features of this
camera (e.g. this is a second camera).
•
The camera is reset for any purpose other than transfer of ownership (
113).
Follow the procedures indicated below to register the camera.
1
Be sure that the network requirements for connecting the camera to a
LAN (
105) have been met.
2
Configure the camera’s network settings (
109).
3
Register my Picturetown user information with the camera (
•
Enter the same e-mail address and nickname (alias) currently used by my Picturetown.
•
If the current nickname uses characters or symbols that are not available using the
camera, enter a new nickname comprised of alphanumerical characters (when a
different nickname (alias) is registered with the camera, the nickname (alias) currently
used by my Picturetown will be used to identify you in e-mail notification of picture
upload sent to recipients).
4
Register the camera with the my Picturetown server.
•
E-mail notification requesting user registration with my Picturetown is sent to the
specified e-mail address after picture upload using Picture Bank. Click the URL provided
in the e-mail notification, enter the camera’s key information, and register the camera
with my Picturetown from the sign-up Web page (
114). Once the camera has been
registered with the my Picturetown server, an e-mail message confirming my
Picturetown registration will be sent to the registered e-mail address.