manualshive.com logo in svg

Nikon 17-151B, Инструкция по эксплуатации

Поделиться
Скачать
Nikon 17-151B Скачать руководство пользователя страница 115

Chapter 5  Troubleshooting 

113

 

Weak contrast in phase contrast image 

Problems 

Check Items 

Reference 

The Ph annular diaphragm of the phase contrast slider 
and the Ph code of the objective are incompatible.

 

 

Bring a Ph annular diaphragm that has the same code 
as the objective's Ph code into the optical path. 

2.2 

3.10.1 

The Ph annular diaphragm of the phase contrast slider 
and the objective's phase ring image are not at 
matching positions.

 

 

Adjust the position of the annular diaphragm. 

2.2 

3.10.1

 

The specimen's phase difference is too big.

 

 

Make a new specimen with a different mounting agent 
or specimen thickness. 

3.10.1 

The specimen's phase difference and the Ph objective 
type are incompatible.

 

 

Use an appropriate Ph objective for the specimen. 

3.10.1 

You are not using a GIF filter.

 

 

Mount a GIF filter on the field lens. 

2.2 

3.10.1 

 

 

 

5.1.3  Problems in Simple Polarizing Microscopy 

Incomplete field of view or no field of view seen 

Problems 

Check Items 

Reference 

The polarizer has been mounted at a tilt.

 

 

Install the polarizer so that it lies flat. 

2.3 

4.2.3 

 

 

 

5.1.4  Problems in Diascopic Fluorescence Microscopy 

Incomplete field of view or no field of view seen 

Problems 

Check Items 

Reference 

The EX filter slider is not at the click position.

 

 

Move the slider until it clicks. 

2.4 

4.2.4 

The BA filter slider is not at the click position.

 

 

Push in the slider all the way. 

 

Move the slider until it clicks. 

2.4 

4.2.4 

 

No fluorescence image seen 

Problems 

Check Items 

Reference 

The excitation filter is not in the optical path.

 

 

Push in the EX filter slider from the right side, bringing 
the GFP position into the optical path. 

2.4 

4.2.4 

The barrier filter is not in the optical path.

 

 

Push in the BA filter slider all the way, bringing the 
barrier filter into the optical path. 

2.4 

4.2.4 

Diascopic illumination is not bright enough.

 

 

Adjust the illumination by turning the brightness control 
knob close to the maximum position. 

 

Widen the aperture diaphragm. 

3.2.1 

3.8 

 

 

Содержание 17-151B





























































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды