420-0050X
EN nv
Niko
sa Industriepark West 40, BE-9100 Sint-Niklaas, Belgium — tel. +32 3 778 90 00 — fax +32 3 777 71 20 — e-mail: [email protected] — www.niko.eu
PM420-0050XR12431
Read the complete user manual before carrying out the installation and activating the system.
1. DESCRIPTION
The
USB charger
for mounting in a flush-mounting box is suitable to charge one or two mobile devices (e.g.
mobile telephones, tablet PCs, cameras, MP3 players and navigation devices). The devices must be equipped
to be charged via a USB port, as specified in the European IEC62694 standard.
In the case of the Apple iPad
, the device must be equipped with at least iOS 5 to display the correct
charging behaviour. In previous versions of the operating system, the device display shows that the device is
not charging when in fact it is charging.
* must be ordered separately
2. INSTALLATION
2.1. Connection
Connect the USB charger according to the following wiring diagram:
L
N
230 Vac
10/16A
250V
2.2. Mounting
Mount the USB charger in a flush-mounting box with a flush-mounting depth of minimum 50 mm.
3. TECHNICAL DATA
power supply voltage
100 – 230 Vac ± 10%, 50 – 60 Hz
output voltage
5 Vdc ± 5%
maximum power consumption
200 mA (230 Vac)
stand-by consumption
≤ 0.3 W (230 Vac)
maximum output current
1500 mA at Ta 35°C
ambient temperature during operation
0 – 40°C (max. 1400 mA)
ambient temperature during storage and transport
-20 – +70°C
connection terminals
2 (maximum capacity per screw terminal: 2 x 2.5 mm²)
USB connection
2.0 (type A)
protection class
class II devices
overvoltage category
III
charging behaviour
complies with IEC62694
4. WARNINGS REGARDING INSTALLATION
-The installation should be carried out by a registered installer and in compliance with the statutory regulations.
-This user manual should be presented to the user. It should be included in the electrical installation file, and
it should be passed on to any new owners. Additional copies are available on the Niko website or via the Niko
support service.
-During installation, the following should be taken into account (non-exhaustive list):
- the statutory laws, standards and regulations.
- the technology currently available at the time of installation.
- this user manual, which only states general regulations and should therefore be read within the scope of
each specific installation.
- the rules of proper workmanship.
This product complies with all of the relevant European guidelines and regulations. If applicable, you can find
the EC declaration of conformity regarding this product at www.niko.eu.
5. NIKO SUPPORT
In case of doubt or for the specific exchange procedure in case of a possible defect, contact the Niko support
service in Belgium at +32 3 778 90 80 or your wholesaler/installer. Contact details and more information can
be found at www.niko.eu under the “Help and advice” section.
6. GUARANTEE PROVISIONS
-The period of guarantee is four years from the date of delivery. The delivery date is the invoice date of purchase of
the product by the consumer. If there is no invoice, the date of production applies.
-The consumer is obliged to inform Niko in writing about the non-conformity, within two months after stating the
defect.
-In case of a non-conformity, the consumer only has the right to a product repair or replacement free of charge,
which shall be decided by Niko.
-Niko shall not be held liable for a defect or damage resulting from incorrect installation, improper or careless
use, incorrect operation, transformation of the product, maintenance that does not adhere to the maintenance
instructions or an external cause, such as damage due to moisture or overvoltage.
-The compulsory regulations of the national legislation concerning the sale of consumer goods and the protection
of the consumer in the countries where Niko sells, directly or via sister companies, subsidiaries, chain stores,
distributors, agents or permanent sales representatives, take priority over the above-mentioned rules and
regulations.
