Niko 16-670, Руководство пользователя

Страница: 15 / 24

16-670 & 16-672
15
- After you have made the connections, you have to use all screws (10 pieces) for mounting the lid. This is necessary to guarantee solidity when mounting
the appliance in a 19”-rack.
- When mounting the appliance in a 19”-rack, you can remove the provided rubber legs (fig.3). Apply lateral pressure to the legs to remove them from the
appliance.
fig.3: removing the rubber legs
3. OPERATION AND USE
For programming, see 16-651
4. USAGE WARNINGS
• This appliance can warm up in use. Install it in a well-ventilated place. Do not place the appliance in a closed room as e.g. a closed bookcase. ALWAYS
KEEP THE VENTILATION SLITS FREE.
• Don not place the appliance on a soft or woolly surface (fabric, carpet or blanket) or close to the curtains.
• To avoid fire or electrical shock, you CANNOT EXPOSE THE APPLIANCE TO RAIN OR HUMIDITY.
• Do not repair parts yourself. Leave repairs to skilled personnel.
• As long as the appliance’s power cable is plugged in, the appliance is live.
5. TECHNICAL DATA
Dimensions: .........................................L483 x W213 x H55mm
Weight:................................................3700g
Operating temperature: ........................0 to 40°C
Enclosure: ...........................................metal
Connector to 16-651:...........................RJ45
Connector to internal units: ...................RJ45
Connector to telephone exchange: ........screw connector
Power supply: ......................................230V (±10%)
Video outputs: ......................................amplification 1 x with respect to video output
Max. load:............................................4,5A (24V)
Choice of the telephone exchange .........contact the Niko support service for a list with the approved telephone exchanges.
6. LEGAL WARNINGS
- The installation has to be carried out by a qualified person and in compliance with the statutory regulations.
- This user manual has to be handed over to the user. It has to be included in the electrical installation file and has to be passed on to any new owners.
Additional copies are available on the Niko website or via the support service.
- During installation, the following has to be taken into account (not limited to list below):
- The statutory laws, standards and regulations;
- The state of the art technique at the moment of installation;
- This user manual, which must be read within the scope of each specific installation, only states general regulations;
- The rules of proper workmanship
- In case of questions, you can consult Niko’s support service or contact a registered control organisation.
Support Belgium:
Support UK:
+32 3 778 90 80 +44 1525877707
website : http://www.niko.be http://www.nikouk.com
e-mail: support@niko.be sales@nikouk.com
In case of a defect, you can return your product to a registered Niko wholesaler, together with a clear description of your complaint (Conditions of use,
stated defect…).
7. GUARANTEE PROVISIONS
- Period of guarantee: 2 years from date of delivery. The delivery date is the invoice date of purchase of the product by the consumer. If there is no invoice,
the date of production applies.
- The consumer is obliged to inform Niko in writing about the defect, within two months after stating the defect.
- In case of a failure to conform, the consumer has the right to a repair or replacement (decided by Niko) free of charge.
- Niko cannot be held liable for a defect or damage as a result of an incorrect installation, improper or careless use or wrong usage or transformation of the
goods.
- The compulsory regulations of the national legislation concerning the sales of consumer goods and the protection of the consumers in the countries where
Niko sells, directly or via sister or daughter companies, chain stores, distributors, agents or permanent sales representatives, take priority over the rules
and regulations mentioned above.
EN