Niko 10-575, Руководство пользователя

Страница: 41 / 59

38 EN
10-575
You can detect vague lines of a
second image
Images from two video sources are
transmitted simultaneously.
Remove the second video source from
the circuit.
Connect the second video source using a
video switcher with the existing bus.
After a while, the video image
turns white. When you switch
the power supply voltage of the
external unit on and off, the signal
will be restored. The image still
turns white after a while.
Thermal defect at the external camera. The V1 lead of the video bus causes a short
circuit with the P or b lead. This results in
an unacceptably high power surge. Check
the wiring for short circuits.
7. TECHNICAL DATA
Power supply voltage +24 V ± 8 %
Material Plastic
Dimensions (without receiver) 250 x 100 x 28 (HxWxD)
Dimensions (with receiver) 250 x 100 x 50 (HxWxD)
Weight 410 g
Allowable ambient temperature 0 to 40 °C
Protection degree IP30
Maximum input current I(Pmax) = 90 mA
Input current in standby I(a) = 0.2 mA, I(P) = 4 mA
Colour white
Monitor TFT colour monitor (320 x 240 pixels, RGB)
8. 9 cm (3.5”) screen diagonal
Video signal 1 Vpp, symmetric