23
EN
4.2: Changing the installation settings
This menu is only accessible to the installer. If you want to change the installation functionalities, then
contact your installer.
Maintenance
Clean the product with a little soap and a damp cloth.
Never use:
- abrasive sponges or abrasive detergents;
- maintenance products that contain solvents or acids, or cleaning products containing acetic acid.
Damage due to improper handling is not covered by the guarantee.
Troubleshooting
A list of possible problems with their causes and remedies is given below.
Problem
Cause
Remedy
Your internal unit does not do any-
thing anymore.
There is a power failure.
Check the power supply in your
home. If the problem is limited to the
internal unit, contact your installer.
You press
but the door does
not open.
The installer has assigned a second
function to this key:
• If you are in conversation, you use
this button to open the door.
• If you are not in conversation, you
switch on the light with this button.
First press
to make a call.
Then press
to open the door.
There is a call but no ring signal.
Only the red LED lights up.
Het belsignaal is uitgeschakeld.
Press to reactivate the ring
signal.
The door automatically opens when
you receive a call.
De “bel-en-kom-binnen’-functie is
geactiveerd.
Switch the "DOORMATIC" function
off using the menu.
The red LED flashes.
Het systeem is bezet.
Wait a moment until the system is
free.
10-570
User manual internal video unit
Содержание 10-570
Страница 31: ...31...