-3-
SPECIFICATIONS
Dimensions
Diameter: 9.8 in/24.9 cm
Height: 21 in/53.3 cm
Weight
11 lb/5 kg
Water tank capacity
Fill tank 1.6 gal/6 liters
Supply tank 2.6 gal/10 liters
Magnet strength
1,200 gauss
Flow rate
With microsponge: approximately 4 minutes per liter (40 minutes for full tank)
With ceramic filter: approximately 30 minutes per liter (5 hours for full tank)
Component life
Microsponge prefilter: 5 years or 5,283 gallons (20,000 liters), whichever comes first
*
Filter cartridge: 6 months or 528 gallons (2,000 liters), whichever comes first
*
Ceramic prefilter: 2 years or 2,113 gallons (8,000 liters), whichever comes first
*
†
Mineral Stones: 1 year or 1,056 gallons (4,000 liters), whichever comes first
*
* Component life may vary, depending on water quality.
†
This system conforms to NSF/ANSI 42 for Particulate class I reduction as verified and
substantiated by test data.
Nikken EPA Establishment No.: 75805-CA-001
Aqua Pour meets NSF/ANSI 42 standards for chlorine reduction
as verified and substantiated by test data.
TROUBLESHOOTING
Problem:
Water does not flow into supply tank.
Cause:
Air trapped in microsponge filter.
Solution:
When water fill tank is full, press on microsponge, or pull upward on
edge of microsponge, to release air bubbles. Make sure that microsponge is correctly
seated afterward.
Problem:
Microsponge filter is discolored.
Cause:
Microsponge filter is dirty.
Solution:
Clean or replace microsponge filter.
Problem:
Water has a disagreeable taste or odor.
Cause:
Poor water quality or filters need replacing.
Solutions:
(1) Check quality of water used in system. (2) Clean or replace microsponge
filter. (3) Replace filter cartridge.
Visit the Aqua Pour Web site at www.e-nikken.com/aqua_pour for more information and FAQs.
