45
BEFORE OPERATION
ASSEMBLY
Please install the accessory turntable on the main unit.
Hold the ribbon tape
A which is attached to the
turntable belt
B and loop the belt over the motor
pulley
C. Be sure it does not twist.
Pull the ribbon tapes
A out of the turntable belt
Place the mat on top of the platter.
Remove the tie securing the tonearm.
Remove the stylus guard.
B.
CONNECTIONS
1
A
B
C
A
3
5
2
4
Before connecting the unit it is advised that you also
consult your current equipment instruction manual.
Note: Be sure to turn off the equipment before you make
changes to the different connections.
1. Connect the power cord to an AC outlet.
2. Connect the RCA cable to the PHONO input of your
AMPLIFIER.
Output terminals Amplifier(Receiver)
L (White)
L Channel
R (Red)
R Channel
NOTE: You can also use a line input by setting the phono
/
line switch at the rear of the turntable to line.
3. Connect PC via USB cord.
