4. Press the SET button again. The year will begin to blink. Press the up or down button to reach the desired year.
5Press the SET button again. The day will begin to blink. Press the up or down button to reach the desired day.
6.Press SET button again, then month will blink. Press the up or down button to reach the desired month.
7.Press the SET button again to exit setting mode.
8.Press DOWN button to switch
℃
and
℉
.
NOTE: You may press the SET button anytime to exit the setting mode.
HOW TO SET AND ACTIVATE THE ALARM
This unit is equipped with 1 alarm: Single Alarm
For the Single Alarm, it will go off only once at the preset time.
To set the single alarm:
1. Press the ALM-SET button. The single alarm icon will appear.
2. Press and hold the ALM-SET button for 2 seconds to enter the setting mode.
The hour will begin to blink. Press the up or down button to reach the desired hour.
In 12hr mode the PM indicator will light for afternoon hours.
3. Press the ALM-SET button again. The minute will begin to blink. Press the up or down arrow to reach the desired minute.
Press the ALM-SET button again to exit the single alarm setting mode.
To activate or deactivate the alarms:
Press the ALM-SET button until the alarm time will appears at the meantime press the up button to activate or deactivate
the chosen alarm. If alarm sign is disappears, the alarm has been deactivated.
RESETTING THE UNIT
In case of malfunction or abnormal display, take out and re-install the batteries again. All settings will be cleared and reset
