manualshive.com logo in svg

NIKKARI SSBC, Инструкция по эксплуатации

Поделиться
Скачать
NIKKARI SSBC Скачать руководство пользователя страница 3

3

 

● Do not take any actions other than those described in this manual and the powerhead manual.

Important Cautions for Safe Work

 

● NIKKARI Co., Ltd. (hereinafter referred to as NIKKARI) cannot foresee all the risks in handling the brush 

cutter. Therefore, also give consideration to general safety measures not stated in this manual and  
powerhead manual to prevent accidents when handling the brush cutter.

 

● The brush cutter is a high-speed cutting tool. To decrease risk of personal injury, special safety 

precautions must be observed. If it is used carelessly or inappropriately, the blade could get contact with 
hands or body, resulting in a serious or fatal injury such as amputation of hands or fingers.

Important Cautions for Instruction Manual

 

● This instruction manual is copyrighted and all rights are reserved. This instruction manual, in whole or 

part, may not be copied, translated or reproduced to any electronic medium or machine readable without 
prior written consent from NIKKARI.

 

● The contents described in this instruction manual and powerhead manual are subject to change without 

prior notice.

 

● Illustrations or figures shown in this instruction manual may partially differ from your brush cutter.

 

● In case of hand over or rent of the brush cutter, instruct to have a good understanding of the contents of 

this instruction manual and powerhead manual before starting any work. Be sure to submit the manual 
of the powerhead to which the attachment is installed to the customer.

 

● If this instruction manual or powerhead manual is lost or damaged, order from sales agency 

immediately.

 

● If you have any questions about descriptions in this manual or powerhead manual, contact the sales 

agency.

Содержание SSBC













































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды