NIKKARI Blower Attachment BL-J
E3502-0
2
Important Information
Intended Purpose
This product (hereinafter referred to as a blower) is designed to be attached to the split engine (to be
purchased separately) for blowing grasses, dead leaves, small stones, sands. The blower is attached to
our approved split engine.
Do not use the blower for any other purpose or in any other way.
Split system
Split engine
（To be purchased separately）
Brush cutter
（To be purchased
separately）
Hedge trimmer
（To be purchased
separately）
Blower
（This Procuct）
Split attachment
Cultivator
（To be purchased
separately）
General
●
Refer to the split engine manual for further information on handling the split engine.
●
When handling the blower, observe all the applicable safety rules, standards or regulations in the area
where the blower is used.
This blower is designed and produced according to the standards and regulations applied in the
purchase country, assuming that the use is only limited to the case of use in the purchase country. This
blower is designed and produced according to the standards and regulations applied in the purchase
country, assuming that the use is limited to the purchase country only. It will not comply with standards
and regulations of other countries. Do not export or resell the blowers to any other countries because
the languages are different.
●
Before use, read this instruction manual and the split engine manual thoroughly, and have a good
understanding of the contents. Do not allow any person who does not understand the contents of this
manual to handle this blower.
●
Do not take any actions other than those described in this manual.
●
Do not make any modifications. If it is modified, the warranty will not cover.
This is a manual downloaded from the web site.
Explanation in the manual which comes together with your purchased product may differ from your product. Use the manual for reference.