Nike Sport Pack, Руководство пользователя

Страница: 5 / 16

5 Nike+ Basketball/Training User’s Guide
Getting Started
Set Up
To get started, open an internet browser on your computer and go to www.nikeplus.com/setup .
Click on Nike+ Training or Basketball. There you’ll find resources such as a links to the latest
version of Nike+ Connect software, the iTunes App store, a list of compatible devices and video
tutorials demonstrating the following setup steps.
1. Download and install Nike+ Connect.
The Nike+ Connect software allows your Nike+ Sport Sensors and computer to communicate with
each other. Through your computer you can update your Sport Sensors to provide greatest
performance and accuracy.
2. Wake and update Sport Sensors
Insert the Sport Sensor into Sport Charger and plug Charger into USB port of computer. This will
“wake-up” the Sport Sensors from a deep-sleep state and launch the Connect utility. each time you
connect your Nike+ Sport Sensors to that computer, Connect software will automatically launch and
check for new firmware (updates for your Nike+ Basketball/Training Sport Sensors). When new
updates are available, a message in Nike+ Connect will prompt you to accept the update. When
prompted, accept the update. If you do not accept the update, Nike+ Connect will ask you again next
time you plug your Nike+ Sport Sensors/Charger into your computer.
For more information on Connect,
see section below.
If you already have Connect installed on your computer, you still need to
update it with the latest version.
Note:: you can download and install the software to more than one computer.