hood. During frost weather, the window must be treated with extra care due to the hardness of the plastic
and that it may crack during folds and strokes. The 4 canopy brackets are different and can be removed and
placed under the seat of the base. The shortest canopy bracket is located in the front of the bike and the
two longest at the rear of the handlebars. You can protect and prolong the life of the rain hood by
impregnating it with fabric impregnation spray.
Front support leg.
Must be used / activated when entering and leaving children. The support leg must be
closed and locked in top position while driving. The support leg is released by lifting the handle and turning
it clockwise.
Gearshift.
Do not tread the pedals when shifting gears. In the case of external gear / electric motor, step in
the pedals when changing gear.
The benches
can easily be removed without use of tools by lifting the elastic of the red knob. Always use
seatbelt (s) when driving with children or adults. Do not leave your child sleeping on the bike with the
seatbelt on.
The width is 89 cm.
But if you have to go through a narrower door, you can ride the bike with slanted
wheels through a door opening of only 85 cm
Children boarding.
Use the front support leg when entering and exiting - and let the children get in and out
themselves.
Transport of a baby
in lift or wax bag. Always use a soft shock-absorbing surface and always use lift straps
located at the bottom of the bike.
Winter driving / Frost.
During the winter, wash your bike and lubricate the chain frequently. The wet
weather and the salt are hard on your bike. If you do not wash the salt of, your bike will be damaged. Use
warm water and a brush to wash and remove the salt. The window of the rain hood is sensitive, and may
crack during serve frost, so be careful with the bumps and folds on the pane. Cables can freeze, so leave the
bike in a low gear if there is severe frost and your bike is not stored frost-free. It is a good idea to have a
service done just before the winter period when your cables are lubricated and inspected. The front brakes
must be lubricated with oil. This is done by spraying / lubricating a little oil on the two brake lever shafts on
both drum brakes. This prevents water, salt and condensation from penetrating into the brake connection
and getting stuck. See the picture.
