6
OPERATION
1. Turn on the wall switch to activate the light, the light is now under Nighttime mode
NOTE
: Allow for approximately 30 seconds warm-up time before the sensor resumes normal activity.
2. To test, walk through the sensor’s detection area.
3. After the light is activated,
keep out of detection area
and the light will switch off automatically after 3 minutes.
The light will be activated again when detecting any movement.
If there is continuing movement in the detection zone, the light will stay on until movement ceases. (after 3
minutes)
NOTE: THE I NTE LLIGE NT MOTI ON SE NSOR TR ACKI NG LI GHT I S DE SI GNE D TO I LLUMI N ATE W HE N THE DE TE CTI ON
ARE A I S E NTE RE D BY A P E RSON AND W I LL DE TE CT MOV I NG HE AT S OURCE . THE RE IS NO GU AR AN TE E
IMP LIE D TH AT I T W ILL P ROVI DE TOTAL S E CURI TY OR P REVENT ILLE G AL E NTRY.
