NightWatcher D1 Digital Video Recorder User Manual
21
3.5.4 Alarm output
Please check current channel status: “○” means it is not in alarm status, “●” means it is in alarm
status.
You can use the desktop shortcut menu or click [main menu]> [alarm function]> [alarm output] to
enter the alarm output interface.
Picture 3.9 alarm output
【
Configuration
】
Alarm is on according to the configuration.
【
Manual
】
Click the “All” button and the corresponding channel is alarmed no matter the channel in
any state.
【
Stop
】
Click the stop button and the according channel stops alarming no matter the channel in any
state.
3.5.5 PTZ control
*PTZ control is a little different between hybrid mode & full digital mode:
Digital channel – the digital channel need link PTZ, the remote device should connect with PTZ and with
protocol correctly set also.
Analog channel – Only when the device is connect with PTZ and configure protocol correctly is ok.
Operation interface is as followed. The functions include: PTZ direction control, step, zoom, focus,
iris, setup operation, patrol between spots, trail patrol, boundary scan, assistant switch, light switch,
level rotation and so on.
Note
1. Decoder A(B)line connects with DVR A(B)line. The connection is right.
2. Click [main menu] >[system configuration] >[PTZ setup] to set the PTZ parameters.
3. The PTZ functions are decided by the PTZ protocols.
