27
◆
Alarm Input Setup
When the equipment obtains the external alarm signal, the alarm function is turned on.
Set method: refer to Motion detect
Note
: "Advanced" button is the same as right click.
◆
Alarm Output Setup
Please check current channel status: “○” means it is not in alarming status, “●” means it is in
alarming status.
You can use desktop shortcut menu or click [main
menu] > [alarm function] > [alarm output] to enter
the alarm output interface.
Configuration:
Alarm is on according to the
configuration.
Manual:
Click the all button and the according
channel is alarming no matter the channel in any
state.
Stop:
Click the stop button and the according
channel stops alarming no matter the channel in any
state.
◆
Abnormality Setup
Analyzing and inspecting current software and
hardware of the device: When some abnormal
events happen, the device will make a relative
answer such as show message and buzzer.
Event Type:
selecting abnormity you want to
inspect
Enable:
Select it to make sure abnormal function
workable
Show message:
Automatically alarm cue dialog
box come out of the main screen
Buzzer:
Device will have two long noise “di di”
while alarm is happen.
Alarm Setup
– Alarm Input, Alarm Output, Abnormality
