NightSearcher Solaris Pro-X, Руководство пользователя, Страница: 6 / 8

Control Panel
Power
button
Settings
button
Battery Status Time Remaining/
Requested time set
Full Half Low
Light Mode
Flood/Spot/Boost
Increase time
Decrease time
Brightness level
Operating The Solaris Pro
Press the power button to turn the Solaris Pro on or off.
Push and hold power button while flood light on for flashing light mode,
press once more to turn off flashing mode.
1. With lamp on, push the settings button to change brightness level. Low/Half/Full.
CHANGING THE LIGHT OUTPUT:
With lamp on push and hold to change light output: Flood/Spot/Boost.
Spot
Boost Flood
The Solaris Pro can be set to operate the number of hours you
require - up to 24 hours.
To programme a runtime, press the up or down button to increase/
decrease time. The egg timer symbol will appear on the display to
indicate you have set a time.
Display colours while charging:
Green - Fully charged
Blue - Normal operation
Red - Low battery
Adjust
time up to
24 hours
Egg timer symbol:
Indicates set time has
been programmed
Flashing Green - Charging
Display colours while in operation:
Green - Average battery
Red Flashing - Very low battery
THERE ARE TWO WAYS TO ADJUST THE BRIGHTNESS LEVELS:
OR
2. With the lamp on, press the increase/decrease time buttons, this will automatically
increase or decrease the brightest level.