3
1
Power on the add-on
camera using the camera
power adapter. You will
hear the camera say,
“Camera is in pairing
mode”
and the status light
will flash quickly. If the
camera is not in pairing
mode please refer to page
9 for pairing instructions.
2
With the NVR connected to
a TV/Monitor, login, then
right click on your mouse and
navigate to the Main Menu
using the options bar.
By default, the camera will be in pairing mode when it’s first powered on.
Pairing allows for the wireless transmission coming from the camera to be
detected by the Wireless NVR.
To pair an add-on camera to your Night Owl Wireless NVR, please use the
following steps:
NOTE:
When pairing the camera to your NVR make sure you are in the same room as the
NVR. ALWAYS test the camera locally before installing.
3
A
B
C
A
B
C
Option #1: Pairing to existing Wireless NVR System
Go to the Camera Menu and
Select the
Add Camera
tab on
the left side of the menu.
The top portion of the screen
will list cameras that have
been found but not yet paired.
The bottom portion of the screen
will show all cameras that are
currently paired to the NVR.
NOTE:
The Reset Button location
depends on the camera version.
