Night Owl WCM-2FEIN, Быстрая настройка

Страница: 4 / 12

OPTION #1: Pairing to existing Wireless NVR
3
By default, the camera will be in pairing mode when it’s first powered on. Pairing allows for the
wireless transmission coming from the camera to be detected by the Wireless NVR.
To pair an add-on camera to your Night Owl Wireless NVR, please use the following steps:
Power on the add-on camera using the camera power adapter. You will hear the camera
say, “Camera is in pairing mode,” and the status light flashes quickly. If the camera is not
in pairing mode, please refer to page 10 for pairing instructions.
1
Note:
When pairing the camera to your NVR make sure you are in the same room as the NVR. ALWAYS test the camera
locally before installing.
With the NVR connected to a TV/Monitor, login, then right click on your mouse and
navigate to the Main Menu using the options bar.
Go to the Camera Menu and select the “Add Camera” tab on the left side of the menu.
The top portion of the screen lists cameras that have been found but not yet paired.
The bottom portion of the screen shows all cameras that are currently paired to the NVR.
2
3
A
B
C
A
B
C
Camera is in
pairing mode.
A
Note:
Please be patient as the NVR locates the add-on camera. May take up to 3 minutes.