Night Owl Tiger-4500, Инструкция по эксплуатации

Страница: 14 / 44

User’s Manual
12
4.8 Sensor Setup
SENSORED RECORD TIME indicates how long the
DVR will continue to record after the motion or sensor is
triggered.
ALARM ON TIME indicates whether the audio buzzer
will sound, and for how long, when motion is detected.
CONT: Continuous alarm until any key is pressed on the remote or DVR
OFF: No alarm
Note:
“ Sensored Record Time” and “Alarm On Time” are measured in seconds.
4.8.1 Motion Detector Setup
This section allows you to set up motion detection options for each camera.
On/Off : Enable or disable motion detection recording.
Level: Sensitivity for motion detection. There are 3
levels sensitivity: Level 1-low, Level 2-mid, and Level
3-High
Area: Select detectable area on the screen.
Area Selection
：
Press the [▲
，
▼
，
◄ and ►] buttons
to select a block and then press the [SEL] button to set
the block to detect motion. The area is detectable when
it is clear, the area is not detectable when it is blacked
out. Press the “MENU” button to set.
NOTE:
Press the “Stop” button to disable the entire area or press the “ALL” button to select the
entire area.
MOTION DETECTOR SETUP
CH1 ON Level 2 Area
CH2 ON Level 2 Area
CH3 ON Level 2 Area
CH4 ON Level 2 Area
( )MOVE (SEL)SELECT (MENU)EXIT
SENSOR SETUP
SENSORED RECORD TIME 30
ALARM ON TIME 05
MOTION DETECTOR SETUP
( )MOVE (SEL)SELECT (MENU)EXIT