THE MK 2 LIMPET ALARM
NO FALSE ALARMS EVER
Silent Mode but connected to a Central Alarm System, AMX®, Crestron® or Aurora® Controllers is useful
when you don’t want to alert the thief that the Limpet has been activated.
4 foot Security Loop
User can also use any
Wire if a longer length is
required
™
NC or NO Contact Closure
Connections
There are many different types of Equipment that the Limpet will Protect
3. Permantly Bonded to the
Projector using the supplied
Welding Adhesive
4. Bolted to a Permanent Fixture of the
Building (Screws or Bolts are Hidden
once the Limpet is closed up)
The Loop Wire exits the Limpet
and is then passed through the
Keep Plate
& returned to the Limpet
Loop Keep made of
Case Hardened Steel
to Rockwell 60 +. Hacksaw
Blade slides straight off
Can also be incorporated into a Central
Alarm System, AMX® , Crestron® or
Aurora ® Controllers
Built in 117 dB Siren
Tamper Proof Screws
make it impossible to open
without the Special Wrench
(supplied)
Battery Test Button and LED Indicator
SHOWN BELOW ARE TWO METHODS USED TO PROTECT PROJECTORS
1. Static Displays of High Value Equipment.
2. Flat Screen Monitors
Are two of the most obvious uses
For Projectors, the cost benefits installing the Limpet include:
1 .Elimination of the Inconvenience factor of being without the Device
2. Elminates Unnecessary Insurance claims
3. Reduced Insurance Premiums.
THE LIMPET CAN BE ATTACHED TO ANY
SURFACE USING CONCEALED SCREWS,
BOLTS OR THE PLASTIC WELDER
LOOP WIRE
INSTRUCTIONS APRIL 2008
CUSTOMABLE CONFIGURATIONS
1. Siren, Loop & NC Contact
2. Silent, Loop and NO Contact .
3. Loop Only.
FOR FLAT SCREEN MONITORS OR OTHER HIGH VALUE ITEMS
Please turn over for complete Installation Instructions
NORMALLY CLOSED
OR NORMALLY OPEN
ALLOW CONNECTIONS
TO BE MADE TO ANY SECURITY SYSTEM,
AMX® ,CRESTRON® OR
AURORA® CONTROLLERS
Arming Key
The above examples shown for protecting Projectors are just as Effective when used with many differnt types of Equipment.
NC
NO
