Nielsen CT2141 Скачать руководство пользователя страница 7

 7 

 

 10 

 

5.  Lack of proper ventilation air will lead to improper combustion. 
6.  Improper combustion can lead to carbon monoxide poisoning leading to 

serious injury or death. Symptom of carbon monoxide poisoning can 
include headaches dizziness and difficulty in breathing. 

 

FUEL GAS ODOR

 

LP gas and natural gas have manmade odorants added 
specifically for detection of fuel gas leaks. 

If a gas leak occurs you should be able to smell the fuel gas. Since 
Propane (LP) is heavier than air you should smell for the gas odor low to 
the floor.

 

ANY GAS OROR IS YOUR SIGNAL TO GO INTO IMMEDIATE 

ACTION! 
 

1.  Do not take any action that could ignite the fuel gas. Do not operate any 

electrical switches. Do not pull any power supply or extension cords. Do 
not light matches or any other source of flame. Do not use your telephone. 

2.  Get everyone out of the building and away from the area immediately. 
3.  Close all propane (LP) gas tank or cylinder fuel supply valves, or the main 

fuel supply valve located at the meter if you use natural gas. 

4.  Propane (LP) gas is heavier than air and may settle in low areas. When you 

have reason to suspect a propane leak, keep out of all low areas. 

5.  Use your neighbor’s phone and call your fuel gas supplier and your fire 

department. Do not reenter the building or area. 

6.  Stay out of the building and away from the area from the area until declare 

safe by the firefighters and your fuel gas supplier. 

7.  FINALLY, let the fuel gas service person and the firefighters check for 

escaped gas. Have them air out the building and area before you return. 
Properly trained service people must repair any leaks, check for further 
leakages, and then relight the appliance for you. 

4. MAINTENANCE 

4.1. The repairs or maintenance operations must only be carried out by 
qualified personnel. 
4.2. The unit must be checked by a qualified technician at least once a year. 
4.3. Regularly check the conditions of gas hose, and gas regulator if it must be 
replaced only use original spare parts. 
4.4. Before starting any maintenance operation on the heater disconnect from 
both gas and electrical suppliers. 
4.5. If the unit has not been used for a long period we advise that a technician 
carries out a general check up before using. It is important to control the 
following: 
4.5.1. Periodically check the gas supply hose conditions and, should it be 
changed, use only original spare parts. 
4.5.2. Check the starting electrode position (see Figure.5).

 

Содержание CT2141











Отзывы: