Nieco BroiVection JF143, Руководство пользователя, Страница: 26 / 36

26 Nieco Corporation - Model JF143G
1. Remove the left side control box cover.
2. Remove the ceramic boot from the back of the
flame sensor.
3. Loosen the wing nut holding the flame sensor in
place.
4. Remove the flame sensor and clean the metal tip
with a DRY, clean scrub pad.
Flame Sensor
Side
Tools
Instructions
Clean: Monthly
Scrub Pad
1. Scrape each shaft of both belts on the discharge
end with the wide end of the shaft cleaning tool.
The tool is located on the clip on the back of the
broiler.
2. Wipe shaft cleaning tool with a towel.
Chain Shafts
Discharge End
Tools
Instructions
Clean: Daily
Shaft Cleaning
Tool