Nieco 624G, Инструкция по установке и эксплуатации

Страница: 7 / 34

7
At rated input the gas supply should deliver a pressure of at least 20 mbar (8" water column) at the broil-
er connection for natural gas and 37 mbar (14.8" water column) for propane gas. Incoming gas supply
pressure must not exceed 50 mbar (20" water column) for either type of gas.
Note: Appliance installation must conform with all local codes. Check all fittings for gas leaks,
including pilot tubing and inlet connections as soon as the appliance is connected to the gas
supply.
Note: This appliance must be isolated from the gas supply piping system during any pressure
testing of the gas supply piping system with test pressure of 3.45 kPa (0.5 psig) or more.
B.7 Electrical Connection
Power requirements are stated on the unit nameplate and must be connected accordingly. Before start-
ing broiler, tighten all electrical connections in control box. An electrical wiring diagram can be found
inside the control box.
Note: Disconnect power before servicing.
B.8 Pre-Operation Check
Be sure that all parts are installed in the proper location.