Nidek Medical LE-700, Руководство по установке

Страница: 40 / 80

34
CHECK AND ADJUSTMENT PROCEDURES: Axis Angle Check and Adjustment
5
Press the Size numeric field in the layout
screen and specify the size.
The numeric keypad appears.
6
Specify the size.
1)
Enter a size using the numeric keypad.

“3.5.1 Size check” (page 27)
2)
After the entry, press .
3)
Press .
The blocking screen appears.
7
Continue the processing method using the same procedures explained by the follow-
ing steps starting from blocking.

“3.5.1 Size check” (page 27) - (Step 7) to (Step 10)
8
Attach the processed lens to the axis angle
alignment jig and check the axis angle.
1)
After processing, attach the lens to the axis
angle alignment jig.
2)
Confirm that the lens and axis angle alignment
jig are parallel.
9
When it is not ±1°, adjust the axis angle.

“3.6.2 Axis angle adjustment” (page 35)
• To increase the stability of the lens, use the optional pliable cup.
Lens Axis angle alignment jig
The edged surface rises up to the right.