§10
ERROR MESSAGE ON INTERFACE
If any error happens during communication between ARK-710A and the external computer, the
ERROR MESSAGE will be displayed on the display pannel.
If the parameter “Error code” is set to YES, the error code number will be displayed as follows.
Error code Table
NO
YES
11
Err IF
ERR 11
DSR Error 1
Activation of DSR does not become high
at receiving sequence of SD command.
12
Err IF
ERR 12
DSR Error 2
Activation of DSR does not become high
at transmission of measured data.
13
Err IF
ERR 13
Data Error
Data to be received is not transmitted.
14
Err IF
ERR 14
Overflow
Too much buffer store of receiving data.
15
Err IF
ERR 15
Command Error Received incorrect command.
16
no dAt.
ERR 16
Data Empty
No data to be transmitted.
Error code
Parameter
Content
Symptom
