Nidec TF037 Series, Спецификация

Страница: 12 / 21

Copy right 2019, Nidec Copal Electronics Corporation
12
8SEFB-0031
①
(2)
■
WARRANTY
Warranty period of the Product is one year from delivery. In case, defect has been found in the Product
during the warranty period and it was found that Nidec Copal Electronics (here in after referred as NCE)
is responsible and liable for the defect, NCE shall either repair or replace the defected Product free of
charge, provided, however, that foregoing warranty shall be voided and shall not be applied in any
instances where
1. Buyer fails to carry out proper handling, operating, installation, testing, service and checkout of the
Product and/or to follow NCE’s instruction or advice with respect to any of these matters,
2. Buyer utilizes any attachments or interface devices or makes any modification to the product which
are not approved in writing by NCE.
3. Buyer incorporates any parts not supplied by NCE into the Product and/or combines any equipment
not supplied by NCE with Product.
4. The alleged defect arises out of NCE’s compliance with any written request, instruction, design
change, drawing or specification (including but not limited to instruction manual, installation manual,
and service manual prepared by Buyer) specifically furnished or imposed by Buyer upon Seller.
5. Defect arisen due to reason that it has been unable to be aware of the problem by ordinary scientific
and technical knowledge and capability in those days.
In addition, NCE shall not indemnify Buyer against any damages and losses which are alleged to have
arisen as a result of and/or caused by defect or malfunction of Product. Buyer must implement a proper
protection measure on Buyer’s system in preparation for sudden malfunction and out of control of Product.
■
PRECAUTION ON HANDLING
1. Do not give strong strass such as shock, vibration and oscillation to Product. While product is working,
such stress may cause Lock-up of rotor which can lead the product to permanent damage .
2. This product doesn’t include a driver. Buyer has to install and configure a driver properly according to
characteristic, rating and recommendation in this specification.
3. This specification doesn’t mean that NCE guarantees Product will not be breakdown or out of order in
any case. Buyer has to implement a proper protection measure on Buyer’s system in preparation for
sudden malfunction and out of control of Product.
4. Product characteristic was measured with NEC’s standard measuring equipment
*1)
, therefore the
characteristics in actual condition or use at Buyer may different from the characteristic in this
specification. Checkout the characteristic results at the actual condition before use.
5. Do not plug and unplug cables while product is powered.
6. Turn power off and stop to use Product immediately in any of following cases
1) any foreign object has got into product 2) the Product have been dropped or got broken 3) the Product
becomes inordinately hot, has a strange odor, emits smoke, or makes unfamiliar noises.
7. Do not use or store Product where shock, vibration, static electricity might occurs and with high
temperature, humidity, dust, corrosive gas, no ventilation and near splashing water, chemical material
or oil
8. Do not seal off or block the air vent and use by connecting products in series.
9. Product has parts rotating at high speed which might cause serious personal injury. Pay attention to
handle Product while it works.
10. If you have any questions, please contact our sales representative.
*1) Flowmeter NCE is using is a mass flowmeter of thermal method displaying volume flow rate at 20
℃
・
1 air pressure.
TF037 Series SPECIFICATION