Nidec RINDCODE NRX Series, Инструкция по эксплуатации

Страница: 4 / 28

3
■ Daily inspection
・ Check to ensure that the load condition is appropriate.
・ Check to ensure that the speed drive housing temperature is not extremely high during operation
・ Check to ensure that there is no abnormal rolling noise with the bearings and/or traction drive parts.
・ Check to ensure that abnormal vibration is not being generated from the speed drive.
<Lubricating oil inspection>
・ Check to ensure that the lubricating oil is supplied to the appropriate indication level (check when operation stops).
・ Check to ensure that the lubricating oil is not dirty, and that the degree of transparency is high.
・ Check to ensure that there is no oil leakage
■ Periodical inspection
(every three months)
・ Check to ensure that pulleys, sprockets, and speed drive mounting bolts are not loose.
・ Check to ensure that there are no problems in the electrical system.
・ Check to ensure that the load condition is appropriate.
・ Replacement of lubricating oil
(A temperature of up to approximately 50ºC higher than the ambient temperature will not cause any problems).
(for example, check oil seals on the input and output shaft parts, O-rings, oil gauge, and the area around the oil filling and drain ports).
◎ If abnormal high temperature, noise, vibration, and/or oil leakage occur, stop operation immediately
and contact us.
*Refer to “3-1 Special lubricating oil list” and “3-2 Replacement of lubricating oil” , and use the special lubricating oil.
Inspection