5. MAINTENANCE AND SERVICING
5.0 GENERAL
DANGER :
BEFORE ANY WORK ON THE GENERATOR, MAKE
SURE THAT THE START-UP CANNOT BE ACTIVATED
BY ANY MANUAL OR AUTOMATIC SIGNAL.
CHECK THAT ALL LOCKS ARE ENGAGED AND
FOLLOW THE SITE SAFETY PROCEDURES
DANGER:
Before working on the machine, make sure that you
have understood the operating principles of the
system. If necessary, refer to the appropriate chapters
in this manual.
To obtain additional information on the maintenance of
sub-assemblies, refer to the chapters dealing with the sub-
assemblies concerned.
When a defective part is replaced with a spare part, make
sure that it is in good condition.
For any electrical work use electrical schematics for
assistance
The whole machine must be kept clean.
CAUTION :
ALL THE CLEANING PERIODS INDICATED IN THIS
MANUAL MAY BE CHANGED (INCREASED OR
DECREASED) ACCORDING TO SITE CONDITIONS
The air inlet and air outlet surfaces must be maintained
clean (Louvers can be cleaned as per the filters) refer to
chapter 5.7.1.
CAUTION :
DIRT ENTERING THE MACHINE MAY POLLUTE AND
THUS REDUCE THE ELECTRICAL INSULATION
CAUTION :
ANY PRODUCT (SEALING COMPOUND, CLEANING
PRODUCT…) USED DURING MAINTENANCE OR
SERVICING MUST BE IN ACCORDANCE WITH LOCAL
REGULATION AND ENVIRONMENTAL STANDARD
Electric Power Generation
Installation and maintenance
5654
en - 2017.
10
/
a
LSA 5
2
.2
MHV
Industrial Range Alternators
- 4 pole
21
