10
(3) - Force Presco or Wiegand mode
[Memory 005]
101 = Always in Presco mode.
202 = Always in Wiegand mode.
All other values = Mode selected by pink wire.
(4) - Auto send key count
[Memory 007]
When this memory is set to a non zero value the VR keypad will
automatically send the data after
x
keys have been pressed, where
x
=value set for this memory.
Note:
In Presco mode the auto send is disabled if the first key pressed is
a
*
or
#
.
(5) - Key press audio & visual confirmation
[Memory 008]
101 = Key presses cause the red LED to flash but no beep is sounded.
151 = Key presses cause a beep to sound but the red LED doesn’t flash.
202 = Key presses provide no visual or audio confirmation. The red LED
doesn’t flash and no beep is sounded.
All other values = Key presses causes a beep to sound and the red LED
to flash.
Wiegand Options
These options set the format of the Wiegand data sent by the
keypad when Wiegand mode is selected. The keypad can send
up to 64 bits of data including a site code up to 32 bits.
Memory
Number
Function
Default
Value
020
Site Code byte 3
0
021
Site Code byte 2
0
022
Site Code byte 1
0
023
Site Code byte 0 (used for standard 8 bit site code)
1
024
Number of bits in Site Code (0 to 32)
8
025
Number of bits in User Code (8 to 64)
16
026
Number of bits for start parity calculation
12
027
Number of bits for end parity calculation
12
028 Parity
polarity
(6)
2
029 Error
handling
(7)
255
032
Wiegand burst mode
(8)
255
033
Custom Wiegand total number of bits
(9)
255
034
Send LSB first
(10)
255
