A
Single chime installation
B
Two or more chimes daisy chain connection (up to 4 chimes)
．
．
1. Front door wiring: wire front 4-pin-jack's 1# & 2# to front button, leave 3# & 4# open.
2. Rear door wiring: wire rear 4-pin-jack's 1# & 2# to rear button, leave 3# & 4# open.
1. Front door wiring: wire the front 4-pin-jack's 1# & 2# of the first chime to front
button; wire 3# & 4# of the first chime to 1# & 2# of the 2nd chime (or next chime).
2. Rear door wiring: wire the rear 4-pin-jack's 1# & 2# of the first chime to rear button;
wire 3# & 4# of the first chime to 1# & 2# of the 2nd chime (or next chime).
Note 1: 1# to 3#, 2# to 4#, no reversed wiring;
Note 2: Use 18#AWG or higher wires to AC power supply, use 22#AWG or lower wires
for button & daisy chain wiring;
NICOR,Inc. 2200 Midtown Place NE Albuquerque,NM 87107
Visit us at www.nicorlighting.com
Dual voltage box (Not provide)
(CARLON SC200DV or equivalent )
Housing
Face Plate
Screw
FIG.A
Rear Door
Front Door
120VAC / 60Hz
White(neutral)
Black(line)
GND
Front Door Button
Rear Door Button
Rear Door
Front Door
120VAC / 60Hz
White(neutral)
Black(line)
GND
Daisy Chain Wring Diagram for 2 or More Chimes
( Operation range up to 150 feet )
connect to next
chime(leave the
last chime open)
FIG.B
connect to next
chime(leave the
last chime open)
