NiCom NTi 300, Руководство пользователя

Страница: 15 / 55

13
TURNING ON THE EQUIPMENT
After the unit is switched on the display will show the logo, as it does this, the unit is
performing a test on the signal lights by lighting them for a few seconds.
Then the traffic light LED turns yellow, while the model name is displayed with the
firmware version at the bottom, at the top left you will see the date and on the top right the
time:
During a waiting time of approximately 15 seconds, the PLL module is locking the
programmed frequency
If the lock process is successful, the working frequency is displayed, the traffic light
becomes green, while the LOCK and ON AIR lights indicate that the PLL module and the
RF module are OK:
If a RF power was previously set, the unit will slowly increase the output power until it
reaches the memorized value.
05-01-2016 13:06
Model NTi 5000
Firmware Version 1.02
WAIT
PLL LOCK IN PROGRESS
Frequency
100.000 MHz
RF FWD 250 W – RF RFL
MOD. :
██████████████▐
KHz 0 10 20 30 40 50 60 70
▲
80 90