9
X-Line 10K RGB
User manual
4. Emission:
Signal indicator light, signal flashing in DMX mode, other conditions for power indication
5. Key Lock:
ON and OFF laser. When at the ON position, laser ON, at the OFF position, laser OFF.
6. Remote Interlock:
Laser remote control interface to control laser ON and OFF. Connection to laser ON, Disconnection to laser
OFF. Cooperating with key lock, when all ON then have laser output. When emergency, can shut off the laser quickly.
7. SFS:
SFS control: scanner fail safety control ON/OFF. If turned OFF, a single point of laser will appear if the scanner fails. If turned
ON, if there is a single point, automatically turn off the laser
8. ILDA In and Out Interface with DB25:
Use laser software control(such as QuickShow from Pangolin).When connect to hardware
of laser software, it turn to ILDA mode automatically.
9. ILDA In and Out RJ45 Interface
：
Use laser software control (such as QuickShow from Pangolin). Simple ILDA interface, using
RJ45 network port as input and output port, only 8 pin signal, cannot automatically identify the ILDA mode, need to open (RJ45-
ILDA
：
ON/OFF) in menu settings to connect the IDLA signal.
10. DMX IN/OUT:
Connect the input and output of DMX signal with 3 pins XLR jack
11. POWER
Switch
12. POWERCON Input Socket:
AC100~250V,50/60HZ
13. FUSE
Menu Setting
Menu
Sub item
Default setting
Remarks
DMX Address
001/002/……/511
001
DMX address
DMX MODE
18CH/25CH
25CH
DMX Channel Mode Selection.
Show Mode
Auto/Sound/ILD/PRG/Ou
tdoor/TEST
Auto
Built-In program mode
Sound Sense
000/001/……/100
080
Sound sensitivity
SD File
File Name
SD/TF card folder Selection
Size
010/011/……/100
80
Pattern size setting
Phasic
X+ Y+/ X- Y+/
X+ Y-/ X- Y-
X+ Y+
XY Phasic setting, only built-In mode valid
Speed
08/09/……/40
30
Scanner speed setting, only built-In mode
valid
Slave Mode
Master/Slave
Slave
Master/Slave mode
Y Phasic
Positive/Reverse
Positive
Y Phasic setting of all mode valid
X Phasic
Positive/Reverse
Positive
X Phasic setting of all mode valid
Color Mode
RGB/White
RGB
Color setting
R Output
000/001/……/100
100
Red Dimmer, only built-In mode valid
G Output
000/001/……/100
100
Green Dimmer, only built-In mode valid
B Output
000/001/……/100
100
Blue Dimmer, only built-In mode valid
RJ45-ILDA
ON/OFF
OFF
RJ45-ILDA signal on/off settings
Load Flash
ON/OFF
OFF
Program downloads on/off settings
DMX State
Show/Black
Show
DMX status settings.
Содержание X-Line 10K RGB
Страница 1: ...X Line 10K RGB Manuel d utilisation 1...
Страница 15: ...X Line 10K RGB User manual 7...
