11
DMX 512 Address Setting
Press the
MENU
button up to when the
is shown on the display. Pressing
ENTER
button and the display
will blink. Use
DOWN
and
UP
button to change the DMX 512 address. Once the address has been selected,
press
ENTER
button to setup or automatically exit menu mode without any change after 1 minute.. Back to the
previous functions without any change press
MENU
button.
Master/Slave Mode
Press the
MENU
button up to when the
is showing on the display. Pressing
ENTER
button and the display
will blink. Use
DOWN
and
UP
button to select the
(Master) or the
(slave 1) or
(slave 2)
mode. Once the mode has been selected, press the
ENTER
button to setup or automatically return to the main
functions without any change after 1 minute. To go back to the functions without any change press the
MENU
button again.
Show Mode
Press the
MENU
button up to when the
is shown on the display. Pressing
ENTER
button, Use
DOWN
and
UP
button to select the
(sound)) or
(color) or
(strobe), or
(fade), if you select the
color ,fade or strobe mode, press
ENTER
button to confirm, and use
DOWN
and
UP
button to select color 1-12 or
fade speed 1-8 or Strob speed 0-255. Once select, press
ENTER
button to setup or automatically exit menu mode
without any change after 1 minute. To go back to the last function without any change press the
MENU
button.
LED display
Press the
MENU
button up to when the
is shown on the display. Pressing
ENTER
button and the display
will blink. Use
DOWN
and
UP
button to select
(display always on) or
(display off ) mode. Once
select, press
ENTER
button to setup or exit menu mode without any change after 1 minute. Back to the functions
without any change press
MENU
button again.
Display Inverse
Press
MENU
button until
is blinking on the display. Use
DOWN
and
UP
button to select
(display
normal) or
(display inverse), press
ENTER
button to setup. Back to the functions without any change
press
MENU
button.
Self-Test
Press the
MENU
button up to when the
is blinking on the display. Pressing the
ENTER
button and the unit
will run the built-in programmer for self-test. To go back to the functions press the
MENU
button.
Fixture Hours
Press the
MENU
button up to when the
is blinking on the display. Pressing
ENTER
button and the display
will show the number of working hours of the unit. To go back to the functions press the
MENU
button.
6.
DMX 512 CONNECTIONS
