Nicols STROB 3000 DMX, Руководство пользователя

Страница: 17 / 18

F.
STAND ALONE OPERATION
-
Turn the fixture ON
-
MODE dipswitches : set #1 ON, #2 to #5 OFF, #6 ON for low-power operation or OFF for high-
power operation.
-
Select either a flash rate or the blinder effect. You set a flash rate by setting the value with pins 1-
8 of the ADDRESS dipswitches (see chart below). The value required to achieve a desired flash
rate can be calculated as follows.
-
To achieve a flash rate of 10 flashes per second on a 50 Hz power supply, the DIP value is 251.
-
To select the blinder effect, set pin 9 ON.
-
Set DIP #10 OFF for normally off operation, or ON for normally on.
G.
REMOTE CONTROLLER BF-04D (optional)
When connected to the remote control BF-04D, STROB 3000 DMX flashes with controlled chase
and intensity when the Strobe button is pressed on the remote.
Set #2 MODE dipswitch on ON to choose BF-04D function.