17
Manuel d’utilisation
PAR LED 1210 Z
3.6
–
Master/Slave mode
If LCD show enter master slave mode.
3.7
–
Restore Factory setting
If LCD shows enter into settings menu
.
This settings menu has 2 options : LCD Back Time settings and Factory Reset settings.
Press the SETUP button when in main menu, enter the state of select options, select the options through UP or
DOWN button.
- LCD Back Time settings
If LCD show press the SETUP button to set the time, can be set : 5s, 10s, 20s, 30s On (KEEP)
-
Factory Reset settings
If LCD shows press the SETUP button to set the factory reset. Press the SETUP button to confirm
« Rest Y/N. Press UP and DOWN button to switch these 2 options
-
Dimmer curvres setting
If LCD shows « dimmer curves », it can be changed to « Linear », « Gammal 5 », Gamma 2.0 », via UP and
DOWN button.
3.8
–
Info mode
Press the MODE button, the LCD will show , enter to get product information.
- If LCD shows press the SETUP button to check the product mode.
- If LCD shows press the SETUP button to check the software version.
- If LCD shows press the SETUP button to check the temperature control state. If LCD shows
« normal », it means the temperature control is normal. If LCD shows « Warning error! », it means abnormal
temperature control work.
